Measurement

Carnot Cycle & Heat Engine Efficiency Calculator

Calculate theoretical maximum Carnot thermal efficiency, heat inputs/rejections, net cycle work, refrigerator/heat pump COP, with real-time animated P-V indicator diagram and reciprocating piston cylinder.

Free to use No sign-up Runs in your browser

Tool workspace

Thermodynamic Heat Engine Presets

Reservoir Temperatures & Heat Input

Hot Reservoir Temperature (T_H, °C)565°C (838.1 K)
Cold Reservoir Temperature (T_C, °C)32°C (305.1 K)
Heat Supplied per Cycle (Q_H, kJ)500 kJ

Thermodynamics & Energy Balance

Max Carnot Efficiency (η_max)63.59%
Net Mechanical Work Output (W_net)317.96 kJ
Waste Heat Dumped (Q_C)182.04 kJ
Refrigeration Coefficient of Performance (COP_ref)0.57
Heat Pump Heating COP (COP_hp)1.57
Total Cycle Entropy Generation (ΔS_universe) 0.00 kJ/K (Reversible)

Real-Time P-V Indicator & Reciprocating Engine Canvas

Follow the four reversible stages: 1→2 Isothermal expansion (heat added), 2→3 Adiabatic expansion, 3→4 Isothermal compression (heat rejected), 4→1 Adiabatic compression.

What is the Carnot Cycle & the Carnot Limit?

Proposed in 1824 by French physicist Nicolas Léonard Sadi Carnot, the Carnot cycle is an idealized thermodynamic cycle operating between two thermal reservoirs at temperatures T_H (hot) and T_C (cold). According to the Second Law of Thermodynamics (Kelvin-Planck statement), no heat engine operating between two given temperature limits can ever exceed the Carnot efficiency: η_carnot = 1 - (T_C / T_H) (with temperatures expressed in Kelvin). It establishes the absolute theoretical ceiling for modern thermal power stations, internal combustion engines, and gas turbines.

How to Use the Calculator

  1. 1Select a thermodynamic preset such as Supercritical Steam, Combined Cycle Gas Turbine, Geothermal, or Ocean Thermal Energy Conversion.
  2. 2Fine-tune the hot reservoir temperature (T_H) and cold sink temperature (T_C).
  3. 3Enter the input thermal energy (Q_H) absorbed during the hot isothermal expansion phase.
  4. 4Observe the animated piston cylinder expanding and compressing in sync with the state point traveling clockwise along the closed P-V indicator diagram.

Energy Engineering & HVAC Applications

Thermal Power Plant Sizing & Steam Optimization

Evaluate how increasing superheated steam temperature from 540°C to 620°C improves thermal power generation yield.

Low-Carbon Geothermal & Industrial Waste Heat Recovery

Determine the thermodynamic feasibility and capital cost viability of ORC (Organic Rankine Cycle) turbines recovering 90°C factory waste heat.

Heat Pump & Air Conditioning Seasonal Performance (SCOP)

Assess the maximum cooling and heating COP achievable across changing winter outdoor temperatures.

Frequently asked questions

Why can't an engine convert 100% of heat into work?

Because heat transfer is accompanied by entropy (S = Q/T). To complete a continuous thermodynamic cycle and return the working fluid to its initial state, entropy must not continuously accumulate; it must be dumped to a colder reservoir (Q_C > 0). Reaching 100% efficiency would require a cold reservoir at absolute zero (T_C = 0 K), which is forbidden by the Third Law of Thermodynamics.

Why is a heat pump COP greater than 100%?

A heat pump does not create heat; it uses electrical work W to 'pump' free ambient heat Q_C from cold outside air into a building. The total heat delivered is Q_H = Q_C + W. Therefore, COP_hp = Q_H / W is always greater than 1 (typically 3.0 to 5.0 for modern inverter units).

Can real engines ever reach the Carnot efficiency?

No. The Carnot cycle requires all four processes to be completely reversible with zero friction, zero turbulence, and infinitesimal temperature gradients (which would take infinite time to transfer heat). Real engines operate at about 50% to 70% of the Carnot limit.